| Part Number | 0445110111 / 0 445 110 111 |
| Injector Type | Solenoid-controlled, Common Rail (CR) or Unit Injector (UI) |
| Nozzle Type | Multi-hole (likely 5–8 holes) |
| Operating Pressure | 1,600–2,500 bar (depending on system) |
| Voltage Supply | 12V (typical, varies by ECU) |
| Resistance (Coil) | ~0.5–2.0 Ω (check exact specs for model) |
| Spray Angle | 140°–160° (varies by nozzle design) |
| Flow Rate | Varies by calibration (e.g., 200–500 cc/min @ 100 bar) |
| Sealing Type | Copper washer (high-pressure sealing) |
| Connector Type | Bosch EV-style electrical plug |
| Needle Lift | ~0.05–0.20 mm (precise lift controlled by ECU) |
| Injection Phases | Pilot-Main-Post injection capable |
| Compatible Fuels | Diesel (EN 590 standard, ULSD recommended) |
| Weight | ~0.5–0.8 kg (varies by model) |
| Torque (Installation) | 25–30 Nm (nozzle) + 40–50 Nm (injector body) follow OEM specs |
| Service Life | ~150,000–250,000 km (depends on fuel quality & maintenance) |
